CARE

Rules for the use and care of VANDA NOVAK footwear

Vanda Novak footwear is manufactured with care for the environment and aims to reduce the use of chemicals. Our products are made of natural leather, so there may be differences in the appearance of individual pairs of shoes, e.g. creases and creases in the leather.

Vanda Novak shoes have linings and insoles made of vegetable tanned leather. They may discolour depending on the individual characteristics of use and the pH of human skin. When deciding to buy shoes with leather linings, it should be taken into account that it may stain tights, socks or feet. Leather soles wear out much faster than those made of synthetic materials.

1. Removing dirt from grain leather

Using a damp cloth or a cotton swab lightly soaked in water, remove any remaining dried mud and unsightly white streaks from the shoes. Leave the shoes to dry and only when they are completely dry can you begin impregnating them.

Shoes should be cleaned locally, avoiding excessive contact of the leather with water, which can lead to discoloration and loss of leather elasticity. Shoes should be dried at room temperature.

Do not use chemicals to clean the leather (e.g. solvents, gasoline, removers).

Before the actual use of any leather product, a test should be carried out on an inconspicuous area, checking the effect of the product on the color, structure and properties of the leather. If the effect is appropriate, you can proceed to the next steps.

2. Maintenance of grain leather

The next step is to use a pommadier (shoe cream) in the color of the leather, to additionally nourish the leather and renew its color. Optionally, before using the cream, you can apply fat, which will prepare the shoes for the harshest weather conditions and the clash with salty streets. Then you should wait a few minutes for the cream to be completely absorbed.

The next step is to brush the shoes with a horsehair brush. This will remove excess polish and the shoes will gain a subtle shine as a result of brushing.

The final stage of maintenance involves applying a nourishing and protective wax, which creates the first barrier when the footwear comes into contact with water, salt and dirt.

This step should be repeated every 6 uses.

3. Principles of maintenance of other materials

TOP	MAINTENANCE METHOD
Grain leather: smooth and snake/crocodile embossed leather	Clean with a damp cloth or brush, remove old layer of polish. Use colored creams and polishes matched to the color of the top. For leathers with a shading effect, use colorless creams and polishes. Polish with a soft cloth or horsehair brush.
Nubuck, velour	Remove dirt with a special brush. Use special products for this type of leather, dyeing to revive the color and impregnating. Do not use pastes or creams.
Synthetic leather	Clean with a damp cloth. You can use products for synthetic leather.
Textile materials	Clean with a soft brush or damp cloth. You can use foam sprays to clean and revive colors.

4. Care and maintenance of the leather sole

One of the most important activities that a user of shoes with leather soles must perform is greasing them. Grease should be done no more than 3 times a year. Grease slows down the wear of the leather and has an anti-slip effect.

Before starting the greasing process, the sole should be cleaned and dried. Applying grease should be done in moderation, as its excess can lead to softening of the leather, and consequently even to its damage. After applying grease to the leather, wait for the sole to dry completely before using it again.

5. Storing your shoes

To avoid deformation of the shoes, it is best to store the shoes with the attached paper fillers in the original box. Keep away from products made of leather and other materials that may dye